Thứ Tư, 17 tháng 7, 2013

Vật liệu bánh vải đánh bóng kim loại, inox, nhôm, thép, nhựa... | Xuất xứ Nhật Bản

Vật liệu bánh vải đánh bóng kim loại, inox, nhôm, thép, nhựa... | Xuất xứ Nhật Bản

Ưu điểm
  • Sản phẩm bánh vải của chúng tôi được làm từ vật liệu chất lượng cao:  100% cotton, polyester, sợi bông, vải sơ dừa, và vật liệu nỉ mài mòn không dệt.
  • Với các bánh vải dệt sợi vải được dệt góc 45 độ, để làm cho thời gian sử dụng bề hơn, đồng thời khi mài ít nóng, ít để lại vết ố hơn.
 


A. Bánh vải đánh bóng cho Vật liệu công nghiệp thông thường

1. UNTREATED MUSLIN BUFF
For all purpose cut / color and color operations on all metals and non metals.
 
2. WHITE BLEACHED MUSLIN BUFF
For color operation on all metals and non metals.
 
3. HARD WHITE BUFF
For cut / color and color operations on all metals.
 
4. MILL TREATED MUSLIN BUFF
Better compound retention and last longer than untreated muslin buffs with faster ability to cut / color and color on all metals.
 
5. SISAL & CLOTH BUFF
For cut and cut / color operation on all metals.
 
6. FULL DISC SISAL BUFF
For cut operation on all metals. Dip treatment is recommended for more firmness and longer buff life.
 
7. HARD COLORED COTTON BUFF
For all purpose cut / color operation on all metals.
 
8. SOFT COLORED COTTON BUFF
For general cut / color operation on precious metals.
 
9. UNTREATED COTTON SET–UP WHEEL
Use as polishing wheel for cut / color and set-up wheel with medium - fine emery grain for cut operation on all metals.
 
10. LEATHER SET–UP WHEEL
Use as set-up wheel with fine emery grain for cut operation on all metals.
 
11. JEAN & COLORED COTTON SET–UP WHEEL
Use as polishing wheel for cut / color and set-up wheel with coarse – medium emery grain for cut operation on all metals.
 
12. HARD COLORED COTTON SET–UP WHEEL
Use as set-up wheel with coarse emery grain for cut operation on all metals
B. Bánh vải đánh bóng cho Đồ Trang Sức

1. UNTREATED MUSLIN BUFF
Use for all polishing job on all metals, precious metals, and non-metals. Materials available are general purpose muslin, heavy thread muslin or fine muslin.
 
2. WHITE BLEACHED MUSLIN BUFF
Use for fine coloring operation on all metals, precious metals and non-metals. Materials available are general purpose muslin or fine muslin.
 
3. YELLOW TREATED MUSLIN BUFF
Good compound retention with ability to cut faster and last longer than untreated muslin buffs on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
 
4. GREEN TREATED MUSLIN BUFF
Good compound retention with more cutting power and last longer than YELLOW TREATED MUSLIN BUFFS on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
 
5. BLUE TREATED MUSLIN BUFF
Good compound retention with most aggressive cutting power and last longer than YELLOW and GREEN TREATED MUSLIN BUFFS on all metals and precious metals. Materials available are general purpose muslin or heavy thread muslin.
 
6. PURPLE TREATED MUSLIN BUFF
Good compound retention. This buff is an ideal buff for fine final coloring with ability in fine cutting operation on all metals and precious metals especially platinum. Materials available is fine muslin.
 
7. MIDGET BUFF
These small size buffs are to be mounted on small mandrel use with spindle hand tool or flexible shaft. Materials available are untreated muslin, white bleached muslin, yellow, green, blue, and purple treated muslin.
 
8. RAZOR EDGE ( KNIFE EDGE ) BUFF
This buff is designed as a knife edge with 1/4” spacing concentric sewn to perform cutting operation on recessed area on all metals and precious metals. Materials available are yellow, green, blue, and purple treated muslin.
 
9. SOFT COLORED COTTON BUFF
This economic mix color buff has been existed among Thai jewelers for many generations. It is low cost and work well on conventional polishing on all metals and precious metals.
 
10. SISAL BUFF
Offer aggressive cutting operation on all metals. Each buff is spirally sewn with or without reinforced leather center.

C. Bánh vải mềm để đánh chi tiết khó, góc cạnh và bề mặt cong

1. UNTREATED AIRWAY CLOTH BUFF
For color operation on all metals and non matals when good flexibility is required.
 
2. MILL TREATED AIRWAY CLOTH BUFF
For cut / color and color operation on all metals. Offer better compound retention, longer buff life, and more firmness than untreated airway cloth buff.
 
3. DIP TREATED AIRWAY CLOTH BUFF
For cut and cut / color operation on all metals. Offer better compound retention, longer buff life, and more firm than mill treated airway cloth buff.
 
4. SEWN AIRWAY CLOTH BUFF
For cut and cut / color operation in narrow area on all metal.
 
5. PLEATED AIRWAY CLOTH BUFFS
For all metal with hard to reach contours.
- ACCORDION ( narrow folds ) : More flexibility for cut / color and color operation.
- DOUBLE FLUTED ( wider folds ) : Less flexibility for cut / color and color operation.
 
6. FINGER BUFFS
For all metals surface with deep reset area and contours.
- CLOTH AND SISAL FINGER : More aggressive for cut operation.
- OUR CLOTH FINGER : More flexibility in cut / color operation.
 
7. MINI AIRWAY CLOTH BUFFS
Good for small internal and external cut / color and color operation on all metals
applications such as tableware and cutlery.
 
8. NON – WOVEN AIRWAY BUFF
Good for satin finishing with no compound needed on all metals with irregular contours.
 
9. CLOSED FACE BIAS SISAL BUFF
Excellent for aggressive cut operation on all metals. Dip treatment is recommended for extra hardness and buff life.
 
10. OPEN DOUBLE CLOTH BIAS SISAL BUFF ( ODCBS )
Offer flexibility with cool running for cut and cut / color operation on all metals with
irregular contours. Dip treatment is recommended for extra hardness and buff life.
 
11. PLEATED DOUBLE CLOTH BIAS SISAL BUFF
Offers aggressiveness for cut and cut / color operations on all metals with irregular contours. Dip treatment is recommended for extra hardness and buff life.
 
12. SISAL CORD BUFF
Each independent sisal cord works extremely flexible for cut / color on all metals with complicated surfaces. Dip treatment is recommended for extra hardness and buff life.
SẢN PHẨM KHÁC

Không có nhận xét nào:

Đăng nhận xét